SLOPE MOUNTED ROOF ANCHORS
LIFELINES AND ANCHORS
SAFE ACCESS SOLUTIONS
GROUND BASED GUARDRAIL
TEL: +44 141 949 1014
Why do I need to recertify my fall protection systems?
The challenge of accessing sloped roofs safely
How to work safely around valley gutters
Keeping workers safe on industrial roofs
The hidden danger on Scotland’s roofs
Fixed ladder compliance: what does it mean?
Don’t neglect your fixed ladder safety responsibilities
Is your ladder safe to use?
Can I hang office Christmas decorations?
The benefits of colour coated handrails
Fall arrest lanyards: what’s the difference?
Working safe on fragile industrial roofs
The importance of personal fall protection recertification
Why you need a rescue plan
Access for all with Kee Access® fittings
Recertification Q&A: the most common questions
Safe access and maintenance with Kee Step-Overs
The Roof Edge pitched roof solution
The importance of checking competency
Christmas closure dates
‘Elf and Safety Myths Debunked
What does ‘not cold to the touch’ mean?
Counterfeit PPE: what’s the risk?
Rooftop walkways: do you need them?
Roof Edge’s guardrail and handrail solution for the NHS
Health and Safety Sentencing Guidelines
Guardrails and handrails: fittings v fabrication
What to expect during a HSE inspection
Important update to the self closing Kee Gate range
What if work at height can’t be avoided?
Safety harnesses: the Roof Edge guide
Understanding safety lines: the Roof Edge guide
The benefits of collective edge protection
The Roof Edge guide to working in the heat
Planning work at height properly: part two
Planning work at height properly: part one
Roof Edge top tips for safe roof maintenance
Why recertification is vital: personal fall protection
Why recertification is vital: collective edge protection
The Roof Edge guide to fragile roofs: part two
The Roof Edge guide to fragile roofs: part one
Debunking health and safety myths
Your 5 Step Guide to Risk Assessments
What is EN 795:2012?
Autumn Roof Maintenance - Your Responsibilities
Working safely near rooflights and skylights
Roof top danger zones
Access points and unprotected edges roof top danger zones
Why you should inspect fall protection systems
Preventing slips and trips on roofs
How to make sure lone workers are safe
Work at Height Audits and Assessments Part 2
Work at Height Audits and Assessments Part 1
Working Safely on Fragile Roofs
What are the benefits of powder coating
Not cold to the touch handrail
How to provide DDA compliant handrails
How to ensure safe maintenance at height
How to inspect and wear a harness correctly
How to inspect a lanyard
Correct fall arrest specification
Assesing Work at Height
Why do I need my fall protection system inspecting?
How to ensure equipment is safe to use
A simple guide to ladder safety
Why you need to recertify collective fall protection
The importance of annual fall protection inspections
Why fall protection inspections are crucial
The benefits of spring loaded safety gates
How to protect workers on fragile roofs
Are fittings better than fabrication for safety barrier construction?
Do you know what PPE you should use with your anchorage devices?
Work at Height _ Correct Equipment Selection Part Three
Work at Height - Correct Equipment Selection Part Two
Work at Height - Correct Equipment Selection Part One
Checking on Competency
What exactly is work at height?
Terms & Conditions
© 2014 Roof Edge Fabrications